GARRI PROCESSING MACHINERY (STAINLESS STEEL), WITH PRICES AND PICTURES!!!

CURRENT PRICES OF STAINLESS STEEL GARRI PROCESSING MACHINERY WITH PICTURES

With the request, and out of the stress of sending to each potential clients, I have decided to post pictures, with prices, of stainless steel, locally fabricated Garri processing machinery.

To decide between stainless steel and non-stainless steel machinery, click HERE

Also, note that all machines could be made to run on electricity or a central generator. It is all the choice of the client. They could also be fabricated, not to use any form of electricity whatsoever.

NOW TO BUSINESS.

LOCALLY FABRICATEDIN NIGERIA, AUTOMATIC CASSAVA TUBER PEELING MACHINE

Price: 450,000 - 1,200,000 NGN

The price ranges with sizes and capacities and this determines the cost of the machinery. A 1.5tons/day is 450,000, a 2.5toms/day is 550,000 and a 5tons/day is 1,000,000.

The main purpose of the cassava peeling machine is to peel and wash clean without the use of hand. 

The good thing about our own peeling machine is that it washes clean, at the same time of peeling. It also comes with an engine to drive it. Unless the client prefers the use of electricity.

But, do you really need a peeling machine? Click HERE to see the video

Peeling and washing machine


The result on white cassava


The result on vitamin A yellow Cassava



LOCALLY FABRICATED IN NIGERIA, CASSAVA TUBERS GRATING/GRINDING MACHINE

Price: 220,000 (500kg/hr), 270,000 NGN (1ton/hr), and 500,000 NGN (2tons/hr)

The stainless steel cassava grating or as some would like to call it (though, it is wrong), cassava grinding machine comes with either a 175 diesel engine as shown in the picture below, for a ton per hour, or it comes with an 8hp diesel engine, for a 2tons/hr.

The purpose is to crush the cassava tubers after peeling and washing is done.




Testing of 1tons/hr grater 



An 8hp diesel engine for a 2tons/hr grater


LOCALLY FABRICATED IN NIGERIA, PRESSERS (CASSAVA DEWATERING MACHINE)

Price: 120,000 NGN for a manual presser with a 32ton jack, 70,000 NGN for a smaller option of 15tons jack. For an Automatic presser, price is 500,000 NGN for 40bags of 50kg/hr and 700,000 NGN for (60bags of 50kg)

Though, if you are buying more than one, the price is 110,000 each. And 70,000 for a smaller option

After grating, you dewater. Of course, that is after the fermentation process.

The 32ton jacks ensured that you can press twice a day!!!

There is an option of an automatic pressing machine that can press up to 40bags (price is 500,000) to 60bags (price is 700,000) at once, and this is all ready to fry before just 1-2hrs.

That's right! With the automatic pressing machine, you can put in 40 bags or 60 bags and watch them ready to be fried within 1-2hrs!

If you would like to have a firsthand knowledge about garri processing, plus how to get a business plan, click HERE



Pressers with 32tons jack. Can hold up to 13bags of grated cassava pulp.


Automatic pressing machine


Bags of grated cassava ready to be pressed



LOCALLY FABRICATED IN NIGERIA, SIFTING MACHINE (SIFTER)

Price: 180,000 NGN with 5.5hp petrol engine

Sifting can be done twice, or once, depending on the type of Garri to produce. This machine does that for you, fast and easy, with its vibrating technique. 

You want to knw more about how sifting works and determines the type of Garri produced? Then, buy my Garri processing manual for just 2,000 NGN. Click HERE

 
Assembling the sifting machine




LOCALLY FABRICATED IN NIGERIA, STAINLESS STEEL MANUAL GARRI FRYER

Price: 120,000 NGN without a chimney and 60,000 NGN for a smaller option.

The manual fryer is just the same old method of Garri frying. I actually sees it as the best, since it involves the old art of frying. 

This 4 by 8 feet fryer would be operated to full capacity by two people.

One manual fryer has the capacity between 3 to 5 bags of 50kg Garri per day.

Heat source could be firewood, gas or charcoal.

The cost above,covers only the tray, with or without the chimney. Clients are expected to provide clay bricks, burnt bricks, or clay muds for the construction of the fireplace. The use of concrete is highly discouraged, because it doesn't retain heat and will crack and gets brittle with intense and constant heat, which, unfortunately, is what is needed.

Manual fryers with chimney

Manual fryer with clay bricks fireplace under heat.

Clay mud fireplace

Garri frying, using manual fryers


Smaller frying tray


LOCALLY FABRICATED IN NIGERIA, AUTOMATIC GARRI FRYING MACHINE 

Price: 600,000 NGN, with electric motor for 50kg/batch and 450,000 for 25kg/batch

An automatic Garri frying machine is not a bad attempt at Garri frying, using modern ways. In fact, it has proven to be very effective and gets the job done!

No need for too much labour.

This fryer will deliver between 7 to 10bags per day.

This fryer is well insulated with fibreglass and doesn't burn you from the outside while working. It also has a firetrap that doesn't allow you to use much fire.

This fryer uses electricity or generator to drive and need firewood, gas or charcoal for the heat.

There is an option for automatic fryers that doesn't require electricity or generator to drive at all. Cost is 650,000.

Check out the benefits plus a video here 


Stainless steel automatic fryer




Automatic fryers 



LOCALLY FABRICATED IN NIGERIA, AUTOMATIC GARRI FRYING MACHINE

Price: 650,000 NGN with petrol engine for 50kg/batch and 500,000 for 25kg/batch

No power? Don't worry, you don't even need a generator. This machine will deliver at the exact capacity as its counterpart above. 7 to 10bags of 50kf per day. The only difference being, it doesn't require electricity to work.

The source of heat is the same: Gas, heat or firewood.


Automatic fryer with petrol engine




LOCALLY FABRICATED IN NIGERIA, AUTOMATIC GARRI GRINDING MACHINE

Price: 150,000 NGN with a petrol engine.

This is one machine you need for grinding the leftovers obtained from sifting. This machine is stainless steel and for small-scale producers, you would need this instead of the hammer mill, which goes for 350,000.

The advantage of this, over the general non-stainless grinder, is numerous. Apart from the durability and the high speed at which it works, it is sure to get you NAFDAC approval, even if you cannot yet afford the hammer mill.




Stainless steel Grinding machine


FOR GARRI PROCESSING FACTORY SET-UP, FULL CONSULTATION ON GARRI PROCESSING AND FACTORY SET UP, GARRI PROCESSING FACTORY DESIGN AND FABRICATION OF GARRI PROCESSING MACHINERY, 
CONTACT ME:


Mr Dare
Call or WhatsApp
+2347035593128
Email: garriguy007@gmail.com

Thank you.

Comments

  1. Thanks so much.
    This has really been of help to me.

    ReplyDelete
  2. This is exactly what I was looking for. Thanks a bunch for sharing this.
    Fully Automatic Washing Machine Price List

    ReplyDelete
  3. Thanks for this. Its informative

    ReplyDelete
  4. It’s really a nice and helpful piece of info. I’m happy that you shared this useful information with us. Please keep us informed like this. Thanks for sharing.

    best washing machines prices dubai

    ReplyDelete
  5. Hello Garri Guy......
    Good morning. Please can you send me a proforma invoice for the machines;
    Peeling machine. Grinding machine, seive machie. hydraulic presser, frying machines and pans, etc. Am working on a plant here in Delta and my sponsors requested for an invoice to show prices, including installation cost. Here's my email: danetiaka@gmail.com
    look forward to your prompt esponse.
    Thank you

    ReplyDelete
  6. Hello gariguy, can you email me the invoice for the cost of the total full package? My email is emmanoza.eh@gmail.com.Thanks.

    ReplyDelete
  7. I want to start a large cassava farm in Nigeria. Please could you give me the address of your farm or a farm where these equipment are currently in use. Seeing is believing and I am really interested in purchasing these machine.
    my e-mail is: oscaranuforo@gmail.com.

    ReplyDelete
  8. Hello gariguy, please can I start processing of garri with just 500k? If possible, please send me necessary machine price and how to go about this. Thanks. My email: arolejesus2000@gmail.com

    ReplyDelete
  9. Good job! Do you own a garri processing factory? I will like to visit it at your convenience. Once again, I thank you for these useful information.

    ReplyDelete

Post a Comment