UPDATED PRICES (WITH PICTURES) GARRI PROCESSING MACHINERY




Good day again, my people,

It's that small boy again, the garriguy.

I will be posting random pictures of a Garri processing factory at owode, Ogun state. 

Client......

Consultant.... garriguy +2347035593128

Location...owode, Egba

Details: design of factory, fabrication and installation of Garri processing machinery at owode Egba, Ogun state.

Capacity....60-120bags per week.

NOTE: FACTORY IS UNCOMPLETED, BUT THE OWNER IS ALREADY HAVING PREORDERS EVEN MORE THAN THE INTENDED CAPACITY





FOR SETTING UP OF GARRI PROCESSING FACTORY, DESIGN, FABRICATION OF GARRI PROCESSING MACHINERY, ANYTHING ABOUT YOUR GARRI PROCESSING FACTORY, PLEASE CALL/WHATSAPP CHAT : +2347035593128



A PEELING MACHINE

This is not all stainless steel. The stainless steel part is the big square that Holds the water. It washes and peels at the same time.

It comes with 175 diesel engine. Sometimes, a 5.5hp petrol engine. Depending on the speed, which also is dependent on the capacity.

This is a 2.5tons/hr grating machine.


PRICE IS 600,000



Peeling machine after action





THE GRATER

1ton/hr, stainless steel, with a 165 diesel engine. Note that this engine uses both water and diesel. It is a small version of the Lister engine. You can use the wind or kick start.

Height is 5ft. Someimes 5ft4inches. With these, you can eat it and have it.

PRICE IS 270,000







PRESSERS

Our pressers are unique, and of a new design. I don't want to say much and I rarely send in pictures of it bcos of copycats. With this beauty, I dnt need planks to support your dewatering process. You knw how planks get messy and rots overtime, right?

This design will drain faster and even firmer.

Does it have a jack? YES

How many bags per batch? 10 and above.

Am I sure?  Yes! The dude is more than 5ft tall. 

How about the price?

Em...em...


PRICE 120,000

But not to worry, price would be reduced if you're buying more than one. 



Besides, be ready to do two batches of dewatering per day!!!



The pressers are the ones at the back





THE SIFTERS

The purpose of the sifters is to sift the cakes (after pressing or after frying) and the finished Garri. The finished Garri are mostly sifted to separate the large grain from the fine ones.

The use of the sifter will be determined by the volume of your output. 

It would be counterproductive to use hands to sift when you produce high numbers. Of course, the consequence is simple, you slow down your production.

PRICE IS 180,000

*the first picture is not complete without the wooden sieve as with the second picture









AUTOMATIC FRYERS

With automatic fryers, you are the King- there are many reasons why you want this, if you are financially capable. This fries 10bags of 50kg in a day. The pictures below are of the automatic Garri processing machine, used in am automatic Garri processing factory.

Automatic fryer that requires the use of electricity or generator


An automatic fryer without the use of electricity or generator

PRICES ARE 550,000 and 650,000 respectively.

*Do not forget, the Cost of installation is 10% of total machinery purchased.

So far so good, these are all you need for a full blown automatic-driven garri processing factory.


A QUICK Q&A

Why the option of a fully automated factory?

1. Faster and neater production process.

If you take into consideration that I'm production, the more you produce, the more profit you realise, then, this may mean something to you. If you make 1,000 on a bag and produces 1000 bags. Even if it takes u 3 months to sell off...a profit of 1,000,000 is assured.

2. You are not at the mercy of your experienced workers.

Take note: in some aspect, I would prefer manual fryer to the automated ones. But the day i realised that your workers might revolt, either for a pay rise or other needs that are mostly a privilege, and you need to meet your production demand, is the day i understand that, sometimes, you need to buy peace. Also, any of your workers may have an emergency and won't be around to deliver for a day, a few days or forever, with an automatic powered machines, even a school drop out would operate it.

3. Class and standard

No doubt, it oozes class, and the standard if your factory cannot be compared. Your workers in working uniforms, standard gloves, protective goggles and so on. These are safety gears and necessary. The class is there, the aesthetic is assured. This, I understand, no be some people's palava.

What if I cannot afford it, as a youth, as an upcoming entrepreneur, do I have any chances?

Oh yes, we do. Because I am also part of you, 😁😁 also upcoming. Now  these are out options- a manual factory or semi automatic. For a simple one...

First, we mustn't think less than a standard factory. All machines must be stainless steel.

I would greatly advise against non stainless steel bcos of its narrow opportunities.

Let's say for instance, someone walks into your factory and decided he needs you to supply ur Garri for a required month bcos he wishes to export or repackage into branded bags. Did you knw that he may need the regulatory bodies to come check his place of production (ur place) before approval? 

Besides, if you see such opportunities, you cannot join them bcos you are meant only for the local feeders.

But, that doesn't mean you cannot have a standard factory without having a whole in your pocket.

A grater...270,000
Two pressers...240,000
Four small manual trays....240,000
Installation is 10% of the total machinery.

With these, you can produce 10bags of 50kg per day. That's is 50-60bags per week. If you make 800 on a bag, that is 40,000 or 48,000 weekly.


Thanks.


For full consultancy services, your architectural sketch, fabrication of machinery and all that concerns your garri processing factory, call or chat (WhatsApp) with garriguy via 

+2347035593128
Email: garriguy007@gmail.com


Comments

  1. Thks so much garri guy, i have a question, what do u think will be the cost of running the smaller factory (50 to 60 bags weekly?) I mean cost of fuel, wages, etc

    ReplyDelete
  2. You might want to request a business plan here, Sir.

    Normally, for a 50bags weekly, you only require a grater, two Pressers and two manual fryers, which costs 160,000 each, with Chimney.

    Thanks​

    ReplyDelete
  3. Thanks for this info. I would like to contact you. I want to start garri business in Imo State. About 50 bags of garri a week is ok. I only need to buy the fryer. Are you in wassap lets chat. Or can we discuss here?

    ReplyDelete
  4. can i have machines that produce upto 100 - 500 bags per week

    ReplyDelete
  5. Pls is it possible to have a proforma invoice from you on garri processing equipment, peeling,grating,frying etc . It is required to enable me access a loan.

    ReplyDelete
  6. Pls can you send me power generator for full automatic factory of 50/100 bgs / week n market to sell to

    ReplyDelete
  7. why cant you put the total cost of a complete system? Thanks

    ReplyDelete
  8. Please what's the total cost of a complete garri processing system, including cost of installation of course?

    ReplyDelete
  9. Kindly direct all your comments to this post and i will reply them immediately

    http://www.garriprocessing.com/2017/05/garri-processing-machinery-stainless.html

    ReplyDelete
  10. Sir, what is the landspace as in how many plots of land needed for a full blown automatic-driven garri processing factory?

    ReplyDelete

Post a Comment